Panasonic PT-43LC14-K Operating Instructions Manual page 79

Remote Control Quick Reference Guide (Operating peripheral equipment)
Programming Without A Code
This procedure searches all codes and is called the "sequence method."
POWER
SAP
LIGHT
TV VCR DVD
DTV RCVR AUX
DBS/CBL
TV/VIDEO A - ANTENNA - B
CH
VOL VOL
OK
MENU EXIT
CH
1 2 3
4 5 6
7 8 9
R-TUNE PROG
0
SWAP SPLIT
SPLIT CTRL
REW PLAY FF
PAUSE STOP REC
SPLIT CH
FREEZE SEARCH
DVD/VCR CH
TV/VCR OPEN/CLOSE
The Universal Remote Control is capable of operating many component brands after entering a code. Some
components may not operate because the codes are not available due to limited memory. The Universal Remote
Control does not control all features found in each model.
Write the code numbers from tables in this space. This will serve as a reference if you need to program your
Remote Control.
CABLE
Cable Box
DBS
Digital Broadcast System
Other Component
Setting to the remote using the step and set method
(When code is not known):
1
Confirm that the external component is plugged
in and on. Turn the component off.
Press OK and POWER together, for at least 5
seconds.
+
2
Press appropriate component button on the
Remote Control.
3
Press VOL ► to move forward to the next code.
Press VOL ◄ to move backward.
Press the Remote Control POWER to test the
component. If the procedure was successful, the
component will turn on.
Note:
• Repeat the above steps until the component code is
4
After the code is found, press OK to store the
code.
Component Codes
VCR
Video Cassette Recorder
RCVR
Receiver or Amplifier
Other Component
found. It may take many attempts before the correct
code is found.
CD
Compact Disc Player
DVD
Digital Versatile Player
Other Component
79