Panasonic PT-43LC14-K Operating Instructions Manual page 41

Adjustment
Button
item
Press ►
button.
H Position
Press ◄
button.
Press ►
button.
V Position
Press ◄
button.
Press OK
H WIDTH
button.
Press ►
button.
V SIZE
Press ◄
button.
Press ►
button.
H SIZE
Press ◄
button.
Press ►
button.
PHASE
Press ◄
button.
Notes:
• This projection display is equipped with various screen modes. If a screen mode with a different aspect from the broad cast
program is selected, image will appear differently. Select the proper screen mode with this in mind.
• Be careful when using this projection display for commercial purposes or for public use, such as in cafes and hotels.
• Shrinking and enlarging images by using screen mode switching function (zoom, etc.) may violate copyright laws.
• Images displayed on a wide screen TV will be cut off or distorted at the edges, when viewing normal aspect images of 4:3 in
ZOOM, JUST or FULL mode. Display in NORMAL mode to view the original image intended by the producer.
• For 1080i and 720p input images, screen size cannot be adjusted.
• The adjusted setting will be kept even when the projection display is turned off.
• The signals output from the monitor output terminal on the back of the projection display is not affected when the screen size
and position is adjusted.
Adjusting screen position and size
Adjustment Details
The image moves to the right.
The image moves to the left.
The image moves up.
The image moves down.
If noise appears on the ends of
the image in SHRINK, switch to
ENLARGE.
If noise appears on the ends of the
image in WIDEN, switch to NARROW.
Press to enlarge image vertically.
Press to shrink image vertically.
Press to enlarge image horizontally.
Press to shrink image horizontally.
Adjust in order to remove any picture interference or contour blurring
which may occur in computer images.
Note
PC input
PC input
Only JUST mode
(SHRINK) (EN LARGE)
Only NORMAL
mode
(Except PC
input)
(WIDEN) (NARROW)
Only ZOOM
mode
PC input
PC input
41