Panasonic PT-43LC14-K Operating Instructions Manual page 18

Installation
How to connect the RGB IN Terminals
Connecting a PC to RGB IN
COMPUTER
RGB IN Terminal (D-SUB 15P) Pin Layouts
Connection port view
Notes:
• Some PC models cannot be connected to the set. A conversion adapter is required to use the RGB cable (D-SUB 15P) to
connect a Macintosh computer to the set. There is no need to use an adapter for computers with PC / AT compatible D-SUB
15P terminal.
• The computer shown in the illustration is for example purposes only. Additional equipment and cables shown are not supplied
with this set.
• Do not set the horizontal and vertical scanning frequencies for PC signals which are above or below the specified frequency
range.
• Select the desired RGB input position by pressing the TV/VIDEO button. (P. 35)
• Similar connections are available at the RGB IN 1, 2 Terminals (For PT-50LC14-K/PT-60LC14-K).
18
Conversion adapter
(If necessary)
RGB cable (D-SUB 15P)
Connect a cable which matches the audio
output terminal on the computer.
PC audio cable (M3 stereo mini pin)
Pin No. Signal name
1 R
2 G
3 B
4 NC
5 NC
6 Ground for R
7 Ground for G
8 Ground for B
NC: Not connected
Example: PT-50LC14-K/
PT-60LC14-K
Pin No. Signal name
9 NC
10 Ground
11 NC
12 NC
13 HD/CSYNC
14 VD
15 NC