TG2480(e).book Page 35 Monday, August 7, 2006 10:32 AM
Guide to handset programming
For your reference, a chart of all programmable functions is printed below. Details for each
item can be found on the corresponding pages. To program, press {MENU}, press {V} or
{^} to scroll through the menu, and press {Select} when the desired menu item or setting
is displayed.
Important:
L Before programming, make sure the handset is not being used. The handset must be
operated near the base unit and while off the base unit.
Main menu
V.M. access
Ringer setting
Voice enhancer
Customer support
Initial setting
Note:
L To exit programming, press {OFF} at any time.
L To go back to the previous menu, press {Back}, or press {Select} while "(Go back)"
is displayed.
For assistance, please visit http://www.panasonic.com/consumersupport
Sub-menu 1
–
Ringer volume
Ringer tone
Interrupt tone
–
–
Voice Mail
Message alert
LCD contrast
Key tone
Auto talk
Caller ID edit
Set tel line
Registration
Change language
Programmable Settings
Sub-menu 2
–
–
–
–
–
–
Store VM access#
VM tone detect
–
–
–
–
–
Line selection
Set dial mode
Set flash time
Set line mode
–
–
Page
page 34
page 36
page 36
page 37
page 38
page 41
page 33
page 33
page 34
page 38
page 40
page 37
page 38
page 40
page 19
page 39
page 39
page 40
page 38
35