Back; Editing A Caller's Phone Number Before Calling Back - Panasonic KX-TG2480 Operating Instructions Manual

TG2480(e).book Page 31 Monday, August 7, 2006 10:32 AM
Editing a caller's phone number
before calling back
You can edit a phone number in the caller
list by removing its area code and/or the
long distance code "1".
1
Press {V} or {^}.
2
Press {Rcvd calls}.
3
Press {V} or {^} repeatedly to display
the desired item.
4
Press {Edit} repeatedly until the phone
number is shown in the desired format.
Each time you press {Edit}, the phone
number will be rearranged into one of 3
patterns.
1 Local phone number
Example:
321-5555
2 Area code – Local phone number
Example:
555-321-5555
3 1 – Area code – Local phone
number
Example:
1-555-321-5555 m
5
To return a call, press {C} or {s}.
L If the line selection is "Auto" (page
40) and you press {C} or {s}, the
indicated line will be selected. If the
indicated line is already being used or
you want to select the other line,
press {MENU}, {Call}, and select the
other line by pressing {Line1} or
{Line2}.
Caller ID number auto edit feature
Once you call back an edited number (see
"Editing a caller's phone number before
calling back"), the unit can automatically
edit other incoming phone numbers each
time you receive a call.
For example, you can use this feature to
set the unit to ignore the area code of
callers in your area code, so that you can
For assistance, please visit http://www.panasonic.com/consumersupport
call these local numbers using caller
information without dialing the area code.
To activate this feature, you must edit an
item in the caller list (see "Editing a caller's
phone number before calling back"), then
call that number. After that, calls from that
caller's area code will be edited
automatically.
This feature can be turned on or off (page
38). The default setting is ON.
Note:
L The handset can remember up to 4 area
codes to be edited. Phone numbers from
the 4 most recently edited area codes
will be automatically edited.
L This feature will not be activated until
edited numbers are called back.
L If you move to another area, you can
turn this feature off to erase previously
m
edited area codes. To use this feature
again, turn it on and reprogram the area
codes you want to edit once again.
m
Caller ID Service
31