Connecting The Charging Cradle (If Included) - Siemens Gigaset AL180 User Manual

Connecting the charging cradle (if included)

If you need to disconnect the plug from the charging cradle,
press the release button
Setting up the handset for use
Inserting the batteries and closing the battery cover
Use only the rechargeable batteries recommended by Gigaset Communications
GmbH
battery types as this could result in significant health risks and personal injury.
For example, the batteries could explode. The phone could also malfunction or be
damaged as a result of using batteries that are not of the recommended type.
* Gigaset Communications GmbH is a trademark licensee of Siemens AG.
¤
Insert the batteries the right
way round.
The polarity is indicated in/on
the battery compartment.
If you need to open the battery cover,
for instance to replace the batteries,
place your fingertip in the cavity on the
casing and pull the battery cover
upwards.
2
1
1
The display is protected by a plastic film.
Please remove the protective film!
Warning
¢
*
( p. 11). Never use a conventional (non-rechargeable) battery or other
a
4
¤
Connect the flat plug from the power supply 1.
¤
Plug the mains adapter into the plug socket 2.
and disconnect the plug 2.
¤
First insert the battery cover at
the top a.
b
¤
Then press the cover
into place.
2
1
until it clicks
b