Table of Contents
Advertisement
Pan support
Home
troubleshooting
24
•
Only clean the pan support once it has cooled to
its normal temperature, i.e. when you can touch
it with your bare hand.
•
The pan support can be removed for cleaning.
•
The pan support should be cleaned with hot
water and a standard cleaning agent, using a
soft sponge or cloth and afterwards, dried
thoroughly with a towel.
•
Never use aggressive or abrasive cleaning
products.
•
Avoid scraping off food residues if possible.
•
Cleaning the burner cap with caustic chemicals
is just as damaging as using acids or paint
stripper.
•
Rough pan scourers or sand paper will ruin the
surface just as scouring powder and glass wool
do.
•
Do not clean the pan stands in a dishwasher.
The pan stands must be completely dry before they
are replaced.
You do not always need to call the After Sales
Technical Assistance. Very often, you can solve the
problem on your own. The table on the following
page contains a few pieces of advice.
Important note:
Only authorised personnel from our After Sales
Technical Department can carry out work on the gas
and electrical supply systems.
Advertisement
Table of Contents
