Table of Contents
Advertisement
Update channel list
When the TV was switched on for the first
time, a full installation of channels was
performed.
By default, when there are changes to these
channel lists, the TV updates them
automatically. You can also switch off the
automatic update or manually update the
channels.
Note: If you are prompted to enter a code,
enter '8888'.
Automatic update
To add or remove digital channels
automatically, leave the TV in standby mode.
The TV updates channels and stores new
channels everyday. Empty channels are
removed from the channel list.
Switch off the channel update message
If a channel update is performed, a message
is displayed at startup. You can switch off this
message.
1. Press .
2. Select [Guest menu] > [Channel
settings].
3. Select [Channel installation] > [Channel
update message].
4. Select [Off], then press OK.
To switch off automatic updates
In the [Channel installation] menu, select
[Automatic channel update] > [Off].
Update channels manually
1. Press .
2. Select [Setup] > [Search for channels] >
[Update channels], then press OK.
3. Follow the onscreen instructions to
update the channels.
Language settings
Menu language
1. While you watch TV, press .
2. Select [Setup] > [TV settings] >
[Preferences] > [Menu language].
3. Select a menu language from the list, then
press OK.
EN
28
Audio language
Set default audio language
For digital channels that are broadcast with
multiple audio languages, you can set your
preferred audio languages. The TV
automatically switches to one of these
languages, if they are available.
1. Press .
2. Select [Setup] > [Channel settings] >
[Language].
3. Select [Primary audio language] or
[Secondary audio language] to set the
preferred audio languages, then press OK.
4. Select the language, then press OK.
Select audio language
If the TV channel broadcasts multiple or dual
audio languages, you can select the preferred
audio language.
1. While you watch TV, press
2. Select [Audio language] for digital
channels or [Dual I-II] for analogue channels,
then press OK.
3. Select from the available languages, then
press OK.
Subtitles on analogue channels
1. While you watch an analogue TV channel,
press TEXT.
2. Enter the three-digit page number of the
subtitles page (usually '888').
If available, subtitles are switched on.
3. Press
to exit text.
Subtitles on digital channels
1. While you watch a digital TV channel,
press
OPTIONS.
2. Select [Subtitles], then press OK.
3. Select [Subtitles off], [Subtitles on] or
[On during mute], then press OK.
If you select [On during mute], subtitles are
displayed only when you press
the sound.
Note: If an MHEG application is activated,
subtitles are not displayed.
OPTIONS.
to mute
Advertisement
Table of Contents
