Philips 22HFL3007D User Manual page 17


[Power On]: When switched on, the
TV switches to a customised mode:
- [On]: If the mains power is switched
on, the TV automatically switches on.
- [Standby]: If the mains power is
switched on, the TV automatically
switches to standby.
- [Last status]: If the mains power is
switched on, the TV automatically
switches to the last status (i.e. on or to
standby).

[Smart power]: When switched on,
energy saving mode is enabled or
disabled.
Control user access
You can control user access to the TV with
the following features:

Lock remote control buttons

Limit access through USB, HDMI-CEC
or SCART

Customise guest view
Enable Auto SCART
Use this feature to control the TV through a
connected SCART device. When the
SCART device is switched on, the TV
automatically switches on.
1. Switch on the TV and the connected
SCART device.
2. Enter the professional setup menu, select
[Control settings] > [Auto SCART] > [On]
> [Power on scart], then press OK.
Enable HDMI-CEC
If connected HDMI devices are HDMI-CEC
compliant, control these devices with the
TV's remote control. For more details on
how to use HDMI-CEC, see Use more of
your TV > Use EasyLink (Page 21).
1. Switch on the TV and all connected
HDMI-CEC devices.
2. Press , select [Setup] > [TV settings] >
[EasyLink] > [On], then press OK.
3. Enter the professional setup menu, select
[Control settings] > [HDMI-CEC IN] >
[On], then press OK.
Enable or disable access to a USB storage
device
1. In the professional setup menu, select
[Control settings] > [Enable USB] > [On]
or [Off], then press OK.
Direct USB access
Automatically display the content of a USB
storage device when the device is
connected.
1. In the professional setup menu, select
[Control settings] > [USB break-in] >
[On], then press OK.
Change other control settings
1. In the professional setup menu, select
[Control settings].
2. Select a setting to change, then press OK:

[Lock KB lock]: Select [On] to lock all
TV buttons except . Select [Off] or
[All] to unlock or lock all buttons
respectively.

[RC lock]: Select [On] to disable all
buttons on the remote control. Note
that you can still enter the professional
setup menu by pressing 3, 1, 9, 7, 5,
3, .

[OSD display]: Enable or disable on-
screen information.

[High security]: Select [On] to restrict
access to the professional setup menu.

[Enable teletext]: Select [On] to
enable text.

[Enable MHEG]: Select [On] to enable
MHEG channels. Applicable to UK only.

[Enable EPG]: Select [On] to enable
the programme guide.

[Enable subtitles]: Select [On] to
enable subtitles.

[Blue mute]: Select [On] to change the
background colour to blue when no
signal is received. The default colour is
black.

[Digital timeout]: Set the maximum
interval time between selection of each
numeric button on the remote control.

[Selectable AV]: Select which external
sources are available when
SOURCE is pressed.
EN 17