Get Started; Prepare The Remote Control - Philips DVDR3600 User Manaul

4 Get Started

Prepare the remote control

1
Open the battery compartment cover.
2
Insert two batteries type R03 or AAA.
Match the indications (+-) inside the
battery compartment.
3
Close the cover.
Note
•
If you are not going to use the remote control for a
long time, remove the batteries.
DVDR3600_75_UM_En_29791.indd 19 DVDR3600_75_UM_En_29791.indd 19
Navigate through the menu
1
Point the remote control directly at the
remote sensor on the front panel and
select the desired function.
2
Use the following buttons on the remote
control to navigate through the on-screen
menus, enter characters or numbers and
confi rm your selection.
Action
Move up or down in a menu.
Move left or right in the menu.
Confi rm a selection.
Button
OK
EN
19
2008-02-15 4:36:40 PM 2008-02-15 4:36:40 PM