The message 'UNKNOWN
DISC' is displayed.
Recording
A TV channel installed
during the DVD recorder's
automatic TV channel
search is fuzzy or distorted.
Picture is fuzzy and
brightness varies when
copying DVD Video discs
or pre-recorded video
cassettes.
Recordings are not
occurring as scheduled.
New recordings cannot be
made.
DVDR3600_75_UM_En_29791.indd 63
DVDR3600_75_UM_En_29791.indd 63
•
This message may appear if you insert a disc that may have
encountered one of the following:
•
Error during recording: the title may be missing.
•
Error while changing the title/ index picture: the original
title/ index picture may be visible.
•
Error during the fi nalisation of the disc or the disc has not
been fi nalised.
•
Check the video connection between the DVD recorder and
the TV.
•
Press P+/- to search for the same TV channel which may
have a clearer picture.
•
You can fi ne-tune the signal of the TV channel. See chapter on
"Adjust Settings – Tune/ Modify a channel manually".
•
This happens if you try to copy DVDs or video cassettes that
are copy-protected. Even though the picture on the TV is fi ne,
the recording on the recordable DVD disc appears distorted.
This interference is unavoidable with copy-protected DVDs or
video cassettes.
•
The recordable DVD disc has a limited recording lifetime,
please change to a new disc for recording.
•
The TV channel you want is not stored or the wrong program
number was selected. Check the TV channels stored.
•
In the timer recording list, one of the following messages may
be displayed in the [ Status ] column:
•
[ Overlap ] : the timer recording has overlapped with another
timer recording.
•
[ Failed ] : A power cut had occurred at the time of the
scheduled recording.
•
[ Overdue ] : The clock setting was adjusted after setting the
timer recording.
EN
63
2008-02-15 4:36:49 PM
2008-02-15 4:36:49 PM