Connect Power; Get Started; Prepare The Remote Control; Find The Tv Input - Philips BDP7500 MK II User Manual

Connect power

Caution
Risk of product damage! Ensure that the power supply
voltage corresponds to the voltage printed on the back
of the unit.
Before connecting the AC power cord, ensure you have
completed all other connections.
Note
The type plate is located on the back of the product.
1
Connect the AC power cable to:
this product.
the wall socket.
»
This product is ready to be set up for use.

4 Get started

Caution
Use of controls or adjustments or performance of
procedures other than herein may result in hazardous
radiation exposure or other unsafe operation.
Always follow the instructions in this chapter in
sequence.

Prepare the remote control

1
Press and push the battery compartment to
slide it open (see "1" in the illustration).
2
Insert two AAA batteries with correct
polarity (+/-) as indicated.
3
Push and slide back the battery compartment
(see "3" in the illustration).
Note
If you are not going to use the remote control for a long
time, remove the batteries.
Do not mix batteries (old and new or carbon and
alkaline, etc.).
Batteries contain chemical substances, so they should be
disposed of properly.

Find the TV input

1
Press to turn on this product.
2
Turn on the TV and switch to the video input
(refer to the TV user manual on how to select
the A/V input).

Use the Home menu

1
Press to display the home menu.
To start disc play, select
To view the USB contents, select
To access the setup menus, select
network media server (e.g. PC), select
.
To access the Net TV services on the
Internet, select

Navigate the menu

1
When a menu is displayed, press the buttons
on the remote control to navigate.
Action
Move up or down.
Move left or right.
OK
Enter numbers/letters/text.
.
.
.
EN
.
11