Step 3: Connecting The Audio Cables - Philips DVDR3345 User Manaul

Basic Connections - DVD recorder
Step 3: Connecting the
audio cables
This connection enables you to listen to
the sound.
Option 1: Using an Audio cable
You can connect the DVD recorder to a
two channel stereo system or receiver in
order to enjoy the stereo sound system.
l
Use the supplied audio cable (red/white
ends) to connect AUDIO L/R OUT
jacks to one of the following devices with
the same input jacks.
– a stereo system (for example, TV or
mini system).
– a receiver with two channel analog
stereo.
TIPS: Before making or changing any connections, make sure that all the devices are disconnected
from the power outlet.
1
Option 1
TV
S-V ID E O
AU D IO IN
O U T
V ID E O IN
l
(continued)
Option 
DIGITAL IN
Option 2: Using a Coaxial cable
You can connect the DVD recorder to
an AV amplifier/receiver in order to
enjoy multichannel surround sound.
Use a coaxial cable (not supplied) to
connect the COAXIAL socket on the
DVD recorder to the digital input on the
AV amplifier/ receiver with a digital multi-
channel sound decoder.
Before you start operating, set the Digital
Audio Output accordingly (see page 55).
If the Digital Output setting does not
match your stereo's capabilities, the
stereo may produce a strong, distorted
sound or no sound at all.
Helpful Hint:
– Do not connect your TV's audio output
jacks to the AUDIO L/R (IN-EXT) jacks on
this DVD recorder as this may cause
unwanted noise.
AV amplifier/
receiver