Table of Contents
Advertisement
Before you begin...
Refer to the instructions of your TV, VCR, Stereo,
or other devices. Note the style of jacks and
connectors on the other equipment. Determine
how to choose different Audio and Video In
channels/sources on your other equipment.
Disconnect all equipment from the power outlets.
Connect equipment to power only after hooking
up everything. Never make or change
connections with equipment connected to power.
Please refer to the below choices we introduce
to you and select either one of them.
Connecting to a TV with audio
and video cables
Back of TV
LEFT AUDIO IN
RIGHT AUDIO IN
VIDEO IN
A
V
U
I
D
D
I
E
O
O
L
R
COAXIAL
VIDEO
Y
Pb
Pr
Connect the VIDEO jack on the DVD player to
the corresponding CVBS VIDEO IN jack on your
TV (cable supplied).
Connect the AUDIO OUT (Left/Right) on the
DVD player to the corresponding AUDIO IN
jacks on TV by using audio cable (supplied). Match
the cable colors to the jack colors.
Connecting to a TV with audio
cable and component video cable
Back of TV
LEFT
Pr/Cr
AUDIO IN
RIGHT
Pb/Cb
AUDIO IN
Y
A
V
U
I
D
D
I
E
O
O
L
R
COAXIAL
VIDEO
Y
Pb
Pr
Connect the Y/Pb/Pr VIDEO OUT on the DVD
player to the corresponding jack on your TV by
using component video cable (not supplied).
Match the cable colors to the jack colors.
Connect the AUDIO OUT (Left/Right) on the
DVD player to the corresponding AUDIO IN
jacks on TV by using audio cables (supplied).
Match the cables color to the jack colors.
LEFT AUDIO IN
RIGHT AUDIO IN
VIDEO IN
AUDIO IN
LEFT
Pr/Cr
RIGHT
AUDIO IN
Pb/Cb
Y
Preparation
Connecting to a TV and a two-
channel Stereo
Stereo
Back of TV
RIGHT AUDIO IN
VIDEO IN
LEFT AUDIO IN
A
V
U
I
D
D
I
E
O
O
L
R
COAXIAL
VIDEO
Y
Pb
Pr
Connect the VIDEO jack on the DVD player to
the corresponding CVBS VIDEO IN jack on
your TV (cable supplied) or component video
cable (not supplied).
Connect the AUDIO OUT (Left/Right) on the
DVD player to the corresponding AUDIO IN
jacks on stereo system by using audio cables
(supplied). Match the cable colors to the jack
colors.
Connecting to a TV and a
Stereo
AV Receiver
Back of TV
(
)
COAXIAL
DIGITAL
VIDEO IN
AUDIO IN
A
V
U
I
D
D
I
E
O
O
L
R
COAXIAL
VIDEO
Y
Pb
Pr
Connect the VIDEO OUT jack on the DVD
player to the corresponding VIDEO IN jack on
your TV by using composite video cable (cable
supplied) or component video cable (not
supplied).
Connect the COAXIAL jack of the DVD
player to the corresponding DIGITAL AUDIO
IN jack on your AV Receiver (cable not
supplied). In this case, do not use the player's
audio left and right output.
Warning!
– Connect the DVD player directly to your
TV, instead of eg. a VCR, to avoid
distortion because DVD video discs are
copy protected.
– Do not connect the DVD player AUDIO
OUT to PHONO IN of your player.
– Set DIGITAL OUTPUT correctly. See
page 19. The Stereo must support MPEG2
or Dolby Digital
TM
. Check the Stereo's
manual to be sure.
VIDEO IN
VIDEO IN
7
Hide quick links:
Advertisement
Table of Contents
