Step 3 : TV channel
programming
Before the DVD recorder can start
recording the TV channel programs,
you need to search for the available TV
channels and store them in the recorder.
Note: Make sure you have successfully
made all the required connections to the
DVD recorder, the TV and Satellite
Receiver/ Cable Box (if any) and switched
them on.
Tuner settings can only be changed
when there is no disc in the disc tray.
SYSTEM
MENU
OK
TIPS:
Press to go back to previous menu item.
Press SYSTEM-MENU to exit the menu.
Getting Started
Automatic TV channel search
This will automatically scan all the
receivable TV channels and the cable
programs from the Cable Box/Satellite
Receiver and store these channels on the
DVD recorder.
Press SYSTEM-MENU on the remote
A
control.
The system menu appears on the TV.
Use keys to highlight
B
{ System Menu - Channel Setup }
and press OK.
Use keys to highlight { Channels
C
Search } and press OK.
The automatic TV channel search starts.
This process may take several minutes.
Once complete, the total number of
channels found appears on the TV.
(continued)
3