Disc Playback
Selecting a CD in the Disc changer
To select a specific disc, press the DISC CHANGE button on the front panel or DISC SKIP
on the remote control, until the required disc indicator flashes.
Result: All the discs will be played in turn, starting with the one selected.
•
If the disc selected is not loaded, the next disc is played automatically.
DVD
•
Playback starts automatically.
•
If the TV is on, a list of MP3s on the
CD will appear on the TV screen.
Note
To stop playback, press STOP button during playback.
•
If pressed once, the stop position will be stored in memory. If PLAy (
is pressed, playback resumes from the stop position. (This function works only with
DVDs.)
•
If pressed twice, "STOP" is displayed, and if PLAy (
playback starts from the beginning.
To temporarily pause playback, press PAUSE button
during playback.
•
To resume playback, press PLAy(
CD
MP3
•
For mixed discs, the play order is as below:MP3/WMA DIVX JPEG.
•
Depending on the content of the disc, the initial screen may appear different.
•
Depending on the recording mode, some MP3-CDs cannot be played.
•
For CD discs, you can press the numeric buttons to select the track, when you
press the numeric buttons after 3 seconds, the playback starts automatically.
•
Table of contents of a MP3-CD varies depending on the MP3 track format recorded
on the disc.
•
DTS Audio is not supported.
•
DVD Audio Disc is not supported.
) button is pressed,
) button again.
ENG
) button
16