Setting The Clock; Disc Playback - Samsung MM-C430D User Manual

Setting the Clock

For each step, you have a few seconds to set the required options.
If you exceed this time, you must start again.
1 2
Switch the system on
by pressing POWER
button.
•
When the correct
4 5
hour is displayed,
press ENTER.
The minutes flash.
• •
Increase the minutes :
• •
Decrease the minutes :
Note •
You can display the time, even when you are using another function, by pressing
TIMER/CLOCK once.
•
You can also use on the main set instead of
Checking the Remaining Time
Press the REMAIN button.
•
For checking the remaining time of a title or chapter
being played.
Each time the REMAIN button is pressed ,
the time is displayed as below:
DVD
TITLE REMAIN TIME
CHAPTER REMAIN TIME
ELAPSED TIME
21
Downloaded From Disc-Player.com Samsung Manuals
3
Press TIMER/CLOCK
Press ENTER.
twice.
The hour flashes.
•
"CLOCK" is displayed. Increase the hours :
•
Decrease the hours :
When the correct
time is displayed,
press ENTER.
"TIMER" appears in the display.
The current time is now set.
buttons in step 3,4.
CD MP3
Press the REMAIN button.
If you press the REMAIN button,
the remaining time is displayed.
To cancel this function, press the
REMAIN button again.

Disc Playback

1
Press OPEN/CLOSE button to open the
disc tray.
2
Load a disc.
•
Place a disc gently into the tray with the disc's label facing up.
3
Press OPEN/CLOSE button to close the disc
tray.
•
For mixed discs, the play order is as below:MP3/WMA
Note
•
Depending on the content of the disc, the initial screen may appear different.
•
Depending on the recording mode, some MP3-CDs cannot be played.
•
For CD discs, you can press the numeric buttons to select the track, when you
press the numeric buttons after 3 seconds, the playback starts automatically.
•
Table of contents of a MP3-CD varies depending on the MP3 track format recorded
on the disc.
•
DTS Audio disc is not supported.
•
DVD Audio disc is not supported.
To stop playback, press STOP button during playback.
•
If pressed once, the stop position will be stored in memory. If PLAY (
is pressed, playback resumes from the stop position. (This function works only with
DVDs.)
•
If pressed twice, "STOP" is displayed, and if PLAY (
playback starts from the beginning.
To temporarily pause playback, press PAUSE button
during playback.
•
To resume playback, press PLAY(
ENG
DIVX JPEG.
) button
) button is pressed,
) button again.
22