Setting the Clock
For each step, you have a few seconds to set the required options.
If you exceed this time, you must start again.
1
Switch the system on
by pressing POWER
button.
When the correct
4
hour is displayed,
press ENTER.
The minutes flash.
•
Increase the minutes :
•
Decrease the minutes :
You can also use
Note
•
Checking the Remaining Time
Press the REMAIN button.
•
For checking the remaining time of a title or chapter
being played.
Each time the REMAIN button is pressed ,
the time is displayed as below:
DVD
TITLE REMAIN TIME
CHAPTER REMAIN TIME
ELAPSED TIME
15
2
Press TIMER/CLOCK
twice.
•
"CLOCK" is displayed.
5
When the correct
time is displayed,
press ENTER.
•
"TIMER" appears in the display.
•
The current time is now set.
on the panel front instead of
3
•
Increase the hours :
•
Decrease the hours :
Note
•
You can display the time, even
when you are using another
function, by pressing
TIMER/CLOCK once.
buttons in step 3,4.
CD
MP3
Press the REMAIN button.
If you press the REMAIN button, the
remaining time is displayed.
To cancel this function, press the
REMAIN button again.
Press ENTER.
The hour flashes.