Mitsubishi Electric Trium SIRIUS User Manual page 44

Caller Line Identity - showing/hiding your mobile number
(network dependent)
Most networks allow the Caller Line Identity feature (CLI) i.e. the fea-
ture which shows the incoming number (ID) while receiving a call. Se-
lecting
such a feature.
Receiving caller ID
This feature enables you to find out whether a network presents the
ID of incoming calls
On networks which allow caller line identity you can disable the send-
ing of your own number, on a call by call basis, by adding #31# be-
fore the number you are calling. Alternatively you can ask your service
operator to always disable the sending of your mobile number. In this
case if you wish to reveal your number, on a call by call basis, you can
do so by adding *31# before the number you wish to call.
Standard network setting
To reset the standard network setting for sending your mobile ID,
44
Receiving caller ID
1
. Select Settings.
Press
Select GSM Services. Select Receiving caller ID.
2
The network will return either Presentation available or Pres-
entation unavailable.
3 Press Exit
1
. Select Settings.
Press
2
Select GSM Services. Select Sending my ID.
3
Select My settings.
Select Preset. The phone will reset to the network setting
4
agreed with your service provider.
will allow you to check the availability of
.
or to return to the standby display.