Using the remote control
Operational range of the remote control
Front of projector
Front of projector
30°
30°
30°
30°
Operate the remote control within a distance of
Operate the remote control within a distance of
10 m (30 feet) from the projector, pointing the IR
10 m (30 feet) from the projector, pointing the IR
beam at the remote control photo-sensor (front
beam at the remote control photo-sensor (front
or rear) of the projector.
or rear) of the projector.
Reception angle
Vertical directions
Vertical directions (ceiling mount)
Rear of projector
Rear of projector
30°
30°
30°
30°
When operating the remote control, keep the distance
from the remote control to the projector via the screen
within about 5 m (15 feet). The operable range of the
remote control, however, depends on the characteristics
of the screen.
20°
10°
20°
•
Keep the remote control photo-sensor out of direct
sunlight or fluorescent lamp light.
•
Keep the remote control photo-sensor at least 2 m (6
feet) away from fluorescent lamps. Otherwise, the remote
control may malfunction.
•
If there is an inverter-operated fluorescent lamp near the
remote control, the remote control operation may become
unstable.
•
When you use the remote control too close to the remote
control sensor, the remote control may not work correctly.
20°
10˚
20°
EN-9