Useful Information; Character Entry - Panasonic KX-TG6711E Operating Instructions Manual

Useful Information

Character entry

The dial keys are used to enter characters and numbers. Each dial key has multiple characters
assigned to it. The characters that can be entered depend on the character entry mode
(page 42).
– Press MFN or MEN to move the cursor left or right.
– Press dial keys to enter characters and numbers.
– Press to erase the character or number highlighted by the cursor. Press and hold
erase all characters or numbers.
– Press * (Aaa) to switch between uppercase and lowercase.
– To enter another character located on the same dial key, press MEN to move the cursor to the
next space, then press the appropriate dial key.
– If you do not press any dial key within 5 seconds after entering a character, the character is
fixed and the cursor moves to the next space.
Character entry modes
The available character entry modes are Alphabet (ABC), Numeric (0-9), Greek (
Extended 1 ( ), Extended 2 (
Numeric, you can select which character is entered by pressing a dial key repeatedly.
When the unit displays the character entry screen:
a MbN: Select a character entry mode. a
Note:
R in the following tables represents a single space.
Alphabet character table (ABC)
z 1 2 3
Numeric entry table (0-9)
z 1 2
Greek character table (
z
1 2
42
TG67xxE(en)_0802_ver102.pdf
), and Cyrillic (
4 5 6
3 4 5
)
3 4 5
Helpline Tel. No.: U.K. 0844 844 3899 Ireland 01289 8333
42
). When in these entry modes except
7 8
6 7 8
6 7 8
2012/08/02 16:27:48
to
),
9 y
9 y
y
9