Taking Pictures Using Burst Mode - Panasonic Lumix DMC-L10K Operating Instructions Manual

Advanced
When [AF] is selected
(Fixing the focus only)
1 Aim the AF frame at the subject.
2 Press and hold [AFL/AEL] to fix the
focus.
• The focus indication lights when the
subject is focused.
• If you release [AFL/AEL],
[AF/AE LOCK] is cancelled.
3 While pressing [AFL/AEL], move the
camera as you compose the picture
and then press the shutter button fully.
When [AF/AE] is selected
(Fixing the focus and the exposure)
1 Aim the AF frame at the subject.
2 Press and hold [AFL/AEL] to fix the
focus and the exposure.
• The focus indication, aperture value
and the shutter speed light when the
subject is focused and the exposure is
set.
• If you release [AFL/AEL],
[AF/AE LOCK] is cancelled.
3 While pressing [AFL/AEL], move the
camera as you compose the picture
and then press the shutter button fully.
• If you set [AF/AE LOCK HOLD] in the
[CUSTOM MENU] menu to [ON], you can
fix the focus and the exposure even if you
release the [AFL/AEL] button after
pressing it. (P102)
• AF Lock only is effective when taking
pictures in manual exposure mode.
• AE Lock only is effective when taking
pictures with manual focus.
• In auto mode [
AE lock.
68
VQT1G39
], the setting is fixed to
Taking Pictures using
Burst Mode
1 Set the drive mode lever to [
A When burst mode is set to high speed
[H].
2 Focus on the subject and take a
picture.
• Hold down the shutter button fully to
activate the burst mode.
∫ Changing the burst speed
1 Press [MENU/SET] to display the
menu.
2 Press 3/4/2/1 to select
[BURST RATE] in the [REC] menu
] and then press 1.
[
3 Press 3/4 to select [H] (High
speed) or [L] (Low speed) and
then press [MENU/SET].
• You can also use the front dial or the
rear dial to select a menu item.
A
MENU
].
/SET