Panasonic Lumix DMC-L10K Operating Instructions Manual page 69

4 Press [MENU/SET] to close the
menu.
• You can also press the shutter button
halfway to close the menu.
∫ Burst speed
Burst speed
(pictures/
second)
• The burst speed is constant regardless of
the transfer speed of the card.
• The burst speeds indicated are when the
shutter speed is faster than 1/60 and the
flash is not activated.
• The burst mode speed may become
slower depending on the following
settings.
– ISO sensitivity (P76)
– Picture size (P92)
– Quality (P92)
– Focus priority (P104)
– Focus mode
• Since the shutter speed becomes slower
in dark places, the burst speed (pictures/
second) may become slower.
∫ Number of pictures recorded in burst
mode
With RAW files
Number of
recordable pic-
tures (pictures)
• Refer to P92 for information about RAW
files.
• When there are no RAW files, pictures
can be taken until the capacity of the card
becomes full. However the burst speed
will become slower halfway. The exact
timing of this depends on the picture size,
the setting for [QUALITY] and the type of
card used.
(High) (Low)
3 2
Without RAW
files
Depends on
the remaining
max. 3
capacity of the
card
∫ Focusing in burst mode
The focus changes depending on the
setting for [FOCUS PRIORITY] in the
[CUSTOM MENU] menu (P104) and the
focus mode setting.
Focus
Focus mode
Priority
ON
AFS
OFF
ON
¢1
AFC
OFF
MF –
¢1 When you take pictures using Live
View, the focus mode setting is [AFS]
and the focus is fixed at the first picture.
¢2 The burst speed may become slower
because the camera is continuously
focusing on the subject.
¢3 The burst speed does not become as
slow as when [FOCUS PRIORITY] is
set to [ON].
• We recommend using the remote shutter
(DMW-RSL1; optional) when you want to
keep the shutter button pressed fully while
taking pictures in burst mode. Refer to
P125 for information about the remote
shutter.
• The exposure and the white balance vary
depending on the burst mode setting.
When burst mode is set to [
fixed to the values set for the first picture.
When the burst speed is set to [
are adjusted each time you take a picture.
• The auto review function is activated
regardless of the setting for auto review.
(The picture is not enlarged.)
• When the flash is activated, you can take
only 1 picture.
• The burst speed is fixed to high speed
[ ] in auto mode [
Advanced
Focus
At the first picture
¢2
Normal focusing
Predicted
¢3
focusing
Focus set with
manual focus
], they are
], they
].
69
VQT1G39