Panasonic Lumix DMC-L10K Operating Instructions Manual page 28

Preparation
[NO.RESET]
Press [ ] to display the [SETUP] menu
MENU
/SET
and select the item to set. (P25)
Reset the file number of the next recording
to 0001.
• The folder number is updated and the file
number starts from 0001. (P117)
• A folder number between 100 and 999
can be assigned.
When the folder number reaches 999, the
number cannot be reset. We recommend
formatting the card after saving the data
on a PC or elsewhere.
• To reset the folder number to 100, format
the card first (P30) and then use
[NO.RESET] to reset the file number. A
reset screen for the folder number will
appear after this. Select [YES] to reset the
folder number.
[RESET]
Press [ ] to display the [SETUP] menu
MENU
/SET
and select the item to set. (P25)
The following settings are reset to the initial
settings.
– [REC] mode menu settings
– [SETUP]/[CUSTOM MENU] menu
settings
• [FAVORITE] (P108) is fixed to [OFF] and
[ROTATE DISP.] (P109) is fixed to [ON].
• If the [SETUP] menu settings are reset,
the following settings are also reset.
– The birthday settings for [BABY1]/
[BABY2] (P87) and [PET] (P88) in scene
mode
– [FILM MODE] (P90)
– The [WORLD TIME] (P127) setting
• The folder number and the clock setting
are not changed.
28
VQT1G39
[USB MODE]
Press [ ] to display the [SETUP] menu
MENU
/SET
and select the item to set. (P25)
Select the USB communication system
after or before connecting the camera to
your PC or your printer with the USB
connection cable (supplied). (P116, 118)
[ SELECT ON CONNECTION]:
Select either [PC] or [PictBridge (PTP)]
if you connected the camera to a PC or
a printer supporting PictBridge.
[ PC]:
Set after or before connecting to a PC.
[ PictBridge (PTP)]:
Set after or before connecting to a
printer supporting PictBridge.
• When [PC] is selected, the camera is
connected via the "USB Mass Storage"
communication system.
• When [PictBridge (PTP)] is selected, the
camera is connected via the "PTP (Picture
Transfer Protocol)" communication
system.