Setting To The 2Nd Curtain Synchro - Panasonic Lumix DMC-L10K Operating Instructions Manual

Advanced
3 Press 2/1 to adjust the flash
output and then press [MENU/SET].
• Select [0] to return to the original flash
output.
• You can also use the front dial or the
rear dial to set.
4 Press [MENU/SET] to close the
menu.
• You can also press the shutter button
halfway to close the menu.
• You can adjust from [`2 EV] to [_2 EV] in
steps of [1/3 EV].
• If you adjust the flash output, the adjusted
flash output value is displayed on the LCD
monitor. Also, [
Viewfinder.
• The flash output setting is memorised
even if the camera is turned off.

Setting to the 2nd Curtain Synchro

2nd curtain synchro activates the flash just
before the shutter closes when taking
pictures of moving objects such as cars
using a slow shutter speed.
1 Press [MENU/SET] to display the
menu.
2 Press 3/4/2/1 to select
[FLASH SYNC.] in the [REC]
] and then press 1.
menu [
66
VQT1G39
MENU
/SET
] is displayed on the
3 Press 4 to select [2ND] and then
press [MENU/SET].
• You can also use the front dial or the
rear dial to select a menu item.
4 Press [MENU/SET] to close the
menu.
• You can also press the shutter button
halfway to close the menu.
∫ 1st curtain synchro
A
P
• The normal method when taking
pictures with the flash.
∫ 2nd curtain synchro
P A
2
• The light source appears behind the
subject and picture becomes dynamic.
• Set it to [1ST] normally.
• [2ND] is displayed in the flash icon on the
LCD monitor if you set [FLASH SYNC.] to
[2ND].
• The flash sync. settings are also effective
when using an external flash. (P123)
• When a fast shutter speed is set, the effect
of 2nd curtain synchro may deteriorate.
• You cannot set AUTO/Red-eye reduction
[ ], Forced ON/Red-eye reduction
[ ] or Slow sync./Red-eye reduction
[ ] when [FLASH SYNC.] is set to [2ND].
MENU
/SET
2560
19
F2.8 1/25
2560
19
F2.8 1/25