How To Use; Replacing Grinding Wheel; Adjusting Wheel Guard; Wiping Off The Antirust - Makita 9820-2 Instruction Manual

HOW TO USE
Replacing grinding wheel
Use the wrench provided to release the
grinding wheel by turning the installation
screw counterclockwise.
To install the grinding wheel, follow the
removal procedure in reverse.
Adjusting wheel guard
The top of the wheel guard should be 1 mm
(approx. 1/3") below the surface of the
grinding wheel. Adjust height by turning
the guard clockwise to lower
it,
or counter-
clockwise to raise
it.
Wiping
off
the antirust
Wipe off the antirust on the sharpening platform guide (rail) and the sharpening holder.
Coat the sharpening platform guide and the sharpening holder with machine oil or spindle
oil.
Removing or installing sharpening platform
guide
To remove the sharpening platform guide,
loosen the screw and slip the
set
plate
aside.
6