Makita 6805BV Instruction Manual
  1. Manuals
  2. Brands
  3. Makita Manuals
  4. Power Screwdriver
  5. 6805BV
  6. Instruction manual

Makita 6805BV Instruction Manual

Hide thumbs Also See for 6805BV:
1
2
3
4
5
6
7
8
Table of Contents

Advertisement

Quick Links

See also: Instruction Manual
Screwdriver
MODEL 6805BV
I N S T R U C T I O N
WARNING:
For your personal safety, READ and UNDERSTAND before using.
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
DOUBLE
INSULATION
M A N U A L
004143

Advertisement

Table of Contents
loading

Related Manuals for Makita 6805BV

Summary of Contents for Makita 6805BV

  • Page 1 Screwdriver MODEL 6805BV 004143 DOUBLE INSULATION I N S T R U C T I O N M A N U A L WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.

  • Page 2: Specifications

    Power supply Responsible manufacturer: The tool should be connected only to a power supply of Makita Corporation Anjo Aichi Japan the same voltage as indicated on the nameplate, and can only be operated on single-phase AC supply. They are double-insulated in accordance with European Standard and can, therefore, also be used from sockets without earth wire.

  • Page 3: General Safety Rules

    GENERAL SAFETY RULES GEA001-3 WARNING: Read all instructions. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury. The term “power tool” in all of the warnings listed below refers to your mains-operated (corded) power tool or battery- operated (cordless) power tool.

  • Page 4: Specific Safety Rules

    19. Store idle power tools out of the reach of chil- the manner intended for the particular type of dren and do not allow persons unfamiliar with power tool, taking into account the working con- the power tool or these instructions to operate ditions and the work to be performed.

  • Page 5: Functional Description

    FUNCTIONAL CAUTION: DESCRIPTION • Always be sure that the tool is switched off and unplugged before adjusting or checking function on the tool. Depth adjustment 004147 When you wish to drive self drilling screws, etc., adjust the depth as follows. Turn the locator to adjust the depth.
  • Page 6 NOTE: • Even with the switch on and motor running, the bit will not rotate until you fit the point of the bit in the screw head and apply forward pressure to engage the clutch. Reversing switch action 004159 CAUTION: •...

  • Page 7: Operation

    CAUTION: • These accessories or attachments are recommended for use with your Makita tool specified in this manual. The use of any other accessories or attachments might present a risk of injury to persons. Only use accessory or attachment for its stated purpose.
  • Page 8 Makita Corporation Anjo, Aichi, Japan 883587C221...

Table of Contents