Operation; Maintenance - Makita 6805BV Instruction Manual

OPERATION

MAINTENANCE

ACCESSORIES
CAUTION:
• These accessories or attachments are recommended for use with your Makita tool specified in this manual. The
use of any other accessories or attachments might present a risk of injury to persons. Only use accessory or
attachment for its stated purpose.
If you need any assistance for more details regarding these accessories, ask your local Makita service center.
• Phillips bit
• Magnetic socket bit
Fit the screw on the point of the bit and place the point of the screw on the sur-
face of the workpiece to be fastened. Apply pressure to the tool and start it.
Withdraw the tool as soon as the clutch cuts in. Then release the switch trig-
ger.
CAUTION:
• When fitting the screw onto the point of the bit, be careful not to push in
on the screw. If the screw is pushed in, the clutch will engage and the
screw will rotate suddenly. This could damage a workpiece or cause an
injury.
• Use the proper bit for the head of the screw that you wish to use.
• Do not continue unnecessary clutching operation.
NOTE:
• Make sure that the driver bit is inserted straight in the screw head, or the
screw and/or bit may be damaged.
• When driving wood screws, predrill pilot holes to make driving easier and
to prevent splitting of the workpiece. See the chart.
Nominal diameter of
wood screw (mm)
3.1
3.5
3.8
4.5
4.8
5.1
5.5
5.8
6.2
CAUTION:
• Always be sure that the tool is switched off and unplugged before
attempting to perform inspection or maintenance.
To maintain product SAFETY and RELIABILITY, repairs, carbon brush inspec-
tion and replacement, any other maintenance or adjustment should be per-
formed by Makita Authorized Service Centers, always using Makita
replacement parts.
•
•
Recommended size of
Front cap
Plastic carrying case
C00016
pilot hole (mm)
2.0
2.2
2.5
2.9
3.1
3.3
3.6
3.8
4.0
7