Temperature Displays; Temperature Display Brightness - Miele KFN 8701 SE ed-1 Operating And Installation Instructions

Frost free fridge freezer with stayfresh zone and ice cube maker
Table of Contents

Advertisement

The correct temperature

Temperature displays

During normal operation the
temperature displays on the control
panel show the average temperature in
the StayFresh zone and the
temperature in the warmest part of the
freezer section.
If the temperature in the freezer section
is not within the range that the
appliance is able to display (below
0 °C), bars will flash in the temperature
display.
Depending on the ambient temperature
and the setting, it can take the
appliance up to 8 hours to reach the
temperature required and for this
temperature to then be shown as a
constant temperature in the display.
The temperature displays flash, if
– a different temperature is being set,
– the temperature in the appliance has
risen by several degrees, indicating
that the appliance is warming up too
much.
This loss of coldness is no cause for
concern in the following circumstances:
– when the door has been left open for
a while, e.g. for removing or storing a
large amount of food,
– when fresh food is being frozen.
However, if the temperature in the
freezer section remains above -18 °C
for a long time, check that the frozen
food has not started to defrost. If it has
started thawing, check that the food is
safe to use and if it is, use it as quickly
as possible.
18

Temperature display brightness

The appliance is supplied with the
brightness of the temperature display
set as low as possible. However, if the
door is opened, a setting changed or if
the alarm is sounding, the temperature
display will appear much brighter for
approx. 1 minute.
You can adjust the level of brightness:
^ Press and hold the Super freeze
button for approx. 5 seconds.
The Super freeze indicator light flashes
;
and a
flashes in the temperature
display.
^ Press one of the temperature selector
buttons repeatedly until an
in the display.
^ Press the Super freeze button again.
^
lights up in the temperature display.
^ You can now adjust the level of
brightness by pressing the
temperature selector buttons. You
can choose from settings 1 to 5:
1: lowest setting,
5: brightest setting.
^
appears

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents