Table of Contents
Advertisement
Switching on and off
Before using for the first time
The stainless steel surface and the
decor strips have a protective cover to
prevent scratching during
transportation.
^ Do not remove this foil until the
appliance has been installed or built
in. Start at one of the upper corners.
^ Wipe stainless steel surfaces over
with a proprietary conditioning agent
for stainless steel, such as Neoblank
(available from the Miele UK Spare
Parts Department). Follow the
manufacturer's instructions on the
label, and apply sparingly with an
even pressure following the direction
of the grain.
^ Clean the inside of the appliance and
the accessories with warm water and
a little washing up liquid, and then
dry with a soft cloth.
Important:
To ensure the correct functioning of
the appliance, let it stand for
between 1½ and 2 hour after
transporting it to its final location
before connecting it to the mains.
Switching on
The StayFresh zone and the freezer
section are switched on independently
of one another so that, if required, you
can switch on only one section.
14
StayFresh zone
^ Press the StayFresh zone On/Off
button on the left hand side of the
control panel.
The StayFresh zone temperature
display lights up. The StayFresh zone
starts cooling. The interior light will
come on if the door is opened.
Freezer section
^ Press the freezer section On/Off
button on the right hand side of the
control panel.
Bars light up in the freezer section
temperature display and the freezer
section starts cooling.
Allow the appliance to run for a few
hours before placing food in it. This will
ensure that the temperature is
sufficiently low.
Cool pack
Place the cool pack in the top freezer
drawer or to save space on the freezer
tray. The cool pack will be at its most
effective after it has been in the freezer
for approx. 24 hours.
Hide quick links:
Advertisement
Table of Contents
