Advertisement
Installing or removing the saw blade
CAUTION:
Always be sure that the tool is switched off and battery removed before installing or
removing the blade.
To install the blade, loosen the screw on
the blade holder.
With the blade teeth facing forward, insert
the blade into the blade holder as far as it
will go. Make sure that the back edge of
the blade fits properly in the groove of the
roller. Then firmly tighten the screw to
secure the blade.
\
Loosen
Screw
CAUTION:
*Always secure the blade firmly. Insufficient securing of the blade may cause blade break-
age or serious injury.
*Always clean out the blade holder before installing the blade. Chips or foreign matter on
the blade holder may cause insufficient securing of the blade.
Use a lubricant or cutting oil between the blade and roller when cutting iron or composi-
tion board, etc. Failure
to
do
so
will shorten the service life of your blade and roller or lead
to potentially dangerous blade breakage.
8
Advertisement
