Advertisement
Circular guide (optional accessorv)
Use of the circular guide insures clean,
smooth cutting of circles under 200 mm
(7-7/8") in radius. Insert the pin through the
center hole and secure it with the threaded
knob. Move the base of the tool fully for-
ward. Then install the circular guide on the
base in the same manner, as the guide rule
(rip fence).
Vacuum head (optional accessory)
The vacuum head is recommended to per-
form clean cutting operations. Install the
plastic cover on the tool by fitting it into the
notches in the tool.
To
attach the vacuum head on the tool,
insert the hook of the vacuum head into
the hole in the base. The vacuum head can
be installed on either left or right side of
the base. Then connect a Makita vacuum
cleaner to the vacuum head.
Fit into notches
Base
\
Plastic cover
I
Hex wrench
Plastic cover
-
Hook of vacuum head
L - . -
Hose of vacuum head
I
14
Advertisement
