How Do I Preview A Route - Mio MOOV V Series Hardware Manual

How do I preview a route?

Route demonstration allows you to:
Preview a route.
Plan and view a route without a GPS fix, such as when you are inside a building.
The following steps will show you how to preview a route.
1. Select a departure point.
If you have a GPS fix, you do not need to select a departure point unless you want the demonstrated route
to start elsewhere.
a)
The Find screen will display.
b) Tap the undock button or tap the docked menu in Slide Touch
c) Scroll down and tap Leaving from.
The Leaving from... screen will display.
d) Tap Find a place, then use the Address Wizard to find your departure point.
2. Select a destination point using the FIND address wizard, the My Places menu or the Explore map.
3. From the Preview screen, tap
Your route is calculated and the Map screen will display.
4. Tap the undock button or the edge of the docked menu.
The GO screen will display.
5. Tap Route simulation.
The Map screen will display the calculated route in route simulation mode.
6. Complete the following:
If you want to ...
increase the speed of the simulation
decrease the speed of the simulation
pause the simulation
cancel the simulation
.
Then ...
tap
tap
tap
tap
19
TM
mode to undock the menu screen.
.
.
.
.