Map Display; Screen Brightness - Mio MOOV V Series Hardware Manual

Map display

Complete the following:
If you want to ...
enable/disable automatic zooming
during navigation
display North at the top of the 2D Map
screen
display "no entry" icons on "no entry"
roads on the Map screens
Change the map colour scheme
Your preferences are automatically saved.

Screen brightness

Complete the following:
If you want to ...
change the screen brightness
set the screen contrast to automatically
adjust
improve screen contrast in light or dark
condition
Then ...
tap the Auto-zoom map when navigating option to turn it On or Off.
If selected, the Map screens will automatically zoom in or out,
depending on your speed, to allow optimal viewing of your route.
tap the Keep North at top of 2D map screen option to turn it On or
Off.
If set to Off, the direction you are travelling in will display at the
top of the 2D Map screen.
tap the Show no-entry road signs option to turn it On or Off. When
turned on, the map display performance can slow down due to the
number of no entry roads in some major cities.
tap the Map scheme, then select a colour scheme from the list.
Then ...
tap to move the Screen Brightness slider towards right to
increase screen brightness.
tap to move the Screen Brightness slider towards left to
decrease screen brightness.
Warning: Your Mio can heat up when the Brightness scale is set
high, therefore, use lower brightness whenever acceptable.
select the Automatic day/night option.
select either Day or the Night option to manually adjust screen
contrast.
54