How Do I Delete A Custom Poi File/Category From My Mio - Mio MOOV V Series Hardware Manual

4.
Set Alert setting as required:
If you want to...
enable a visual warning when a POI of this
category is in close proximity
select an icon to display on the map screens
for POIs of this category
select the distance from a POI of this
category at which the visual warning should
display or the warning chime should sound
enable a warning sound when a POI of this
category is in close proximity
select a custom sound alert file to play when
a POI of this category is in close proximity
5.
Click Add to device to add the POI to your Mio.
Each file corresponds to a POI category; for example, Hotels.csv will be listed in your Mio as the Hotels
category.

How do I delete a Custom POI file/category from my Mio?

1.
In the Installed POIs section, click Delete next to the file name.
The file is removed from the list, but is not yet deleted.
2.
Accept the warning message.
The selected file/category is deleted.
Then...
select the Visual alert check box.
Click Browse to select the icon file from your local or
network drive. When you have located the icon file, select it
and click Open.
The icon file must be a bitmap (.bmp) graphic with a
minimum size of 6x6 pixels and a maximum size of 32x32
pixels.
If you do not select a custom icon, a default icon will
display.
select the distance from the Distance box.
To change the units used to measure distance for this
POI category, from the tools menu click on options and from
the general option select Use metric units check box.
select the Audio alert check box.
Either select a sound file from the list, or
Click Add to select a sound file (.WAV format) from
your local or network drive. When you have located the
file, select it and click Open.
If you do not select a custom sound file, a default sound
alert will play.
17