Connect; How Do I Search For A Poi Using Connect - Mio MOOV V Series Hardware Manual

Connect

Connect is a MioMore Desktop application that allows you to search and install local POIs information from your
computer to your Mio. POI locations will be shown in My Places.
Before you begin, ensure your Mio is correctly plugged into your computer: Plug the large end of the USB cable
directly into a USB port on your computer (not a USB hub); plug the small end into
Make sure you have an active Internet connection for this feature.
MioMore Desktop Connect

How do I search for a POI using Connect?

You can either search using the last known location on your Mio, or search for a new location by completing the
following:
1.
From the country drop down box, select a Country.
2.
From the Region/State drop down box select a region or state if required.
3.
In the Place name box, enter the first few letters of a city and then select your preference.
4.
Click Continue.
The Available Services page will display.
5.
Select your preferred search service.
The selected services page will display.
Depending on the country you are navigating, the available search services may vary.
6.
Enter your search criteria, then click Search.
The Select search method page will display.
For some countries you are required to accept the terms of use.
7.
Select your preferred search method, then click Search.
A list of search results will display.
Connect is not available for all models.
31
−
on the bottom of your Mio.