8.
Select the destination media (Mio internal memory) for the selected maps, then click Install Maps.
The selected maps will be installed and change colour to green.
9.
To use your Mio, disconnect the USB cable. You may need to manually reset your Mio.
WARNING: Do not disconnect the USB cable from the Mio USB Socket until the installed map or
maps have changed colour to green.
How do I remove maps from my Mio?
1.
Open MioMore Desktop, and then click My Maps.
2.
From the My Mio panel, select the check box next to the map you want to remove.
3.
Click Remove Maps to remove the selected maps.
4.
Confirm that you want to remove the selected map when prompted. The map is removed from your Mio.
You can reinstall these maps at any time via MioMore Desktop.
VOICE COMMAND
VOICE COMMAND is not available on all models and is only available in selected countries.
MioMore Desktop
VOICE COMMAND
Depending on your Mio model, you will be able to set the destination quickly by using Voice Command. VOICE
COMMAND is a MioMore Desktop application that allows you to install or remove voice file for the Voice
Command function.
1.
Open MioMore Desktop, and then click VOICE COMMAND.
2.
Complete the following:
If you want to ...
install a voice command file,
Then ...
from the Loadable files section, select a file source (e.g. DVD) and then
click Open to display the Available voice command files section.
In the Available voice command files section, click Install selected
files to install the selected voice command file. Otherwise, click
Upwards to return to the Loadable files section.
70