Frequently Asked Questions; Technical Faults - Miele LaPerla G 2830 SCi Operating Instructions Manual

With the aid of the following guide, minor problems can be fixed without a service call.
,
Repairs should only be carried out by a qualified and trained person in
accordance with local and national safety regulations. Unauthorized repairs
could cause personal injury or machine damage.

Technical faults

Issue
After the dishwasher
was turned on the
display stays off and the
stand by indicator does
not flash.
The dishwasher stops
during a program.
The buzzer sounds.
The display shows the
following:
Technical fault FXX
Call Technical Service
The buzzer sounds. The
display shows the
following:
Fault Waterproof F70

Frequently asked questions

Possible fault
The machine is not
plugged in.
The fuse has tripped.
The fuse has tripped.
There may be a technical
fault.
The waterproof system
has activated.
Solution
Insert the plug.
Reset the circuit breaker.
Make sure it is a 15 A
breaker.
Reset the circuit breaker.
Make sure it is a 15 A
breaker.
– Turn the dishwasher off
by touching the s
control.
After a few seconds:
– Turn the dishwasher
on.
– Select the desired
program.
Start
– Select .
If the problem persists,
call Technical Service.
– Turn off the water
supply.
– Call Miele Technical
Service.
53