Miele LaPerla G 2830 SCi Operating Instructions Manual page 43

Detergent
To achieve the best results the used
detergent can be set on your
dishwasher. The selection allows
"Powder", "Gel", "2 in 1" and "3 in 1"
tabs. The program cycle sequence will
be adjusted for the selected detergent.
Depending on the program the
program running time may increase.
Powder
When using powder detergent, salt and
rinse aid must be added for best
results. See "Filling the salt container"
and "Rinse aid". The rinse aid refill
message is activated.
Gel
When using gel detergent, salt and
rinse aid should be added for best
results. See "Filling the salt container"
and "Rinse aid". The rinse aid refill
message is activated.
2 in 1 tabs
The function "2 in 1" adjusts the
program cycle to the use of "2 in 1"
detergent products (detergent with
rinse aid). The rinse aid dosage and the
rinse aid refill message are deactivated.
3 in 1 tabs
The function "3 in 1" adjusts the
program cycle to the use of "3 in 1"
detergent products (detergent with
rinse aid and water softener salt). The
rinse aid dosage and rinse aid refill
messages are deactivated. The salt
usage for the water softener will be
1
reduced to / and
3
Do not use this extra feature
– when using "2 in 1" detergents
(detergent with rinse aid).
– if your tab water has a water
hardness of over 21°dH (21 gr/gal
[US]). See also the information from
the detergent manufacturer.
The cleaning and drying
performance of these detergent
products vary.
The detergent selection is set by
default to powder detergent.
^ Select the detergent used and
OK
confirm with
Settings J
1
/ .
4
.
43