Table of Contents
Advertisement
Disconnect the cooker hood from the
mains supply by:
-
switching it off at the isolator or
at the wall socket and removing
the plug, or
-
withdrawing the fuse from the
fused spur connection unit, or
-
withdrawing the mains fuse, or
-
removing the screw-out fuse (in
countries where this is
applicable).
Exercise caution when changing
halogen lamps. They get very hot
during use, and remain hot for some
time after being switched off. Do not
touch the surface directly when
changing a lamp, as grease particles
from your fingers will adhere to the
surface and damage it. Please follow
the manufacturer's instructions.
^ Remove the cover to the lamp. To do
this, loosen the screws to the left and
right of the cover, unhook the lamp
cover and take it downwards and off.
To avoid damaging the lighting or
the hob below, make sure you hold
the lamp cover and halogen lamps
securely at all times when handling
them.
^ Pull the halogen lamp out of its
socket.
^ Gently push the new halogen lamp
into the socket (20 W with G 4
connector and side reflector, e.g.
Osram MINISTAR
reflector).
It is important that the halogen
lamps have side reflectors.
The halogen lamp must be
positioned with the reflector at the
top so that the light is directed
downwards.
^ Refit the lamp cover using the two
screws.
r
with side
25
Advertisement
Table of Contents
