Tv Screen And Video; Sound - Panasonic Diga DMR-XS380 Operating Instructions Manual

TV screen and video

Screen size is wrong.
Check the "TV Aspect" or "Aspect for 4:3 Video".
( 82)
Adjust the aspect ratio setting on TV. Refer to your
TV's operating instructions.
If the 16:9 aspect ratio image is output to a 4:3 TV
and the image will be stretched vertically, set "TV
Aspect" to "4:3". ( 82)
Check "Aspect for Recording" before recording or
file conversion. ( 79)
If you connect to 4:3 TV, set "HDMI Video Format"
to "576p/480p". ( 83)
Pictures do not appear with the HD quality
although HD setting was made.
The pictures are output with 576p/480p depending
on the programme.
The screen changes automatically.
If there is no operation for 5 minutes or more, the
displayed screen switches to the other states
automatically (only when the "Screen Saver" is set
to "On"). ( 82)
There is a lot of image lag when playing
video.
Set "HD optimizer" in the Picture menu to "Off".
( 71)
The images from this unit do not appear on
the TV.
The picture is distorted during play, or video
will not play correctly.
Check the connection and the TV's input settings.
The unit's "TV System" setting differs from the TV
system used by the disc now playing. While
stopped, keep pressing [∫] and [< OPEN/
CLOSE] on the main unit for 5 or more seconds.
The system switches from PAL to NTSC or vice
versa. ( 82)
Picture may not be seen when more than 4
devices are connected with HDMI cables.
Reduce the number of connected devices.
The picture may be distorted or a black screen
may appear between scenes recorded with
different aspect ratios.
DVD-R DL and +R DL discs have two writable
layers on one side. Video and audio may
momentarily cut out when the unit is switching
layers.
Set "Deep Colour Output" or "Contents Type Flag"
in the Picture menu to "Off". (
No sound.
Distorted sound.
Cannot switch audio.
83)

Sound

Check the connections or amplifier's settings.
( 8, 89)
To output audio from a device connected with an
HDMI cable, set "HDMI Audio Output" to "On".
( 83)
You cannot switch the audio if "Digital Audio
Output" is set to "Bitstream" ( 81)
93
VQT2J57