Table of Contents
Advertisement
Timer Recording
What is FREEVIEW+
FREEVIEW+ is the functions that enable timer recordings to be controlled by the signal sent
from the broadcaster. "Guide Link", "Series recording" (
available.
"Guide Link" – If you set a timer recording from the TV Guide, the recording's start and stop
times can be controlled by the broadcaster, e.g. delayed start.
This is indicated by "Guide Link" in the Timer Recording screen in step 2 (
"Split Programme" – If a programme is separated into 2 or more parts by some other
programmes e.g. news, this unit pauses recording during the gap.
This is indicated by "Split" in the Timer Recording screen in step 2 (
When setting timer from the 1st split programme, other parts of the programme will be
automatically set and indicated by the timer mark on the TV Guide, but not shown on the
timer recording list.
If you set a timer recording from the TV Guide, the recording's start and stop times are
controlled by the signal sent from the broadcaster. If the signal is not sent correctly,
the recording may lack the beginning or the ending part of the programmes.
In order to make the timer recording work successfully, we recommend you set the
start time earlier and the end time later by some minutes, up to a maximum of 10
minutes for Guide Link to function.
e.g. When you set the timer recording for a programme that will start at 10:00 and end
at 11:00, set "9:58" and "11:05" in step 3 (
[HDD] [RAM] [-R] [-RW‹V›] [+R] [+RW]
Preparation:
≥ Turn on the television and select the appropriate video input to suit the
connections to this unit.
≥ Turn on this unit.
≥ If recording to DVD, insert a disc that you use for recording (
≥ [RAM] If the disc is protected, release protection (
≥ Confirm that the clock on the unit's display is set to the correct time.
1
– The GUIDE Plus+ list appears.
3, 4, 2, 1 to select the future programme,
2
then
OK
TV Guide:
Sun 10th
Sun 10/10/10
19:45
2 BBC 2
BBC 1
BBC 2
Channel 4
Channel 5
-24
hours
+24
TIMER REC
OPTION: Select Advert, etc.
info
RETURN
– If "Selection Screen" appears, press [3, 4] to select "Single Timer Rec.", then
press [OK]. Refer to "Series recording" (
Confirm the programme
3
(start and end time) by TV
magazine, etc. and correct if
necessary using
3, 4, 2, 1 then
– The settings are stored and the timer programme is on.
– The timer icon is displayed.
– "F" lights on the unit's display to indicate timer recording standby has been
activated.
– Repeat steps 2–3 to programme other recordings.
– Press [Í] to turn the unit off.
≥"Guide Link" will not be displayed and will not function under the following conditions.
– Timer programmes set manually (
– Timer programmes set from the TV Guide are modified or start/stop time
changed by more than 10 minutes from original time.
(Series): Series recording (
(Split):
22
VQT2J27
?
TM
below).
Landscape
Channels
All Types
All
Holiday Programme
Time:
2
hours
Prog. Type
Category
Page
Guide Change Display Mode
Page
"Guide Link", "Split" and "Series" are displayed here.
OK
30).
34) is set.
The programme is split in two or more parts by other programmes. This
unit pauses recording during the gap between the parts of the
programme.
34), and "Split Programme" are
below).
below).
15).
70).
Timer
Remain
HDD
30:24 SP
DVD
1:58 SP
Recording
Selection screen
SUN 10/10/10 19:45:00
TUE 14.10.08 12:54:00
HDD
Channel
Date
Stop
Mode
STTL
AD
Start
View
DVD
The West Tonight
2 BBC 2
10/10 SUN
20:30
22:30
HDD
SP
OFF
OFF
Single Timer Rec
3 TV
Series Timer Rec
All Channels : BBC 2
News & Factual
Holiday Programme
Delete
TUE 14.10.08
Programme Name
(Guide Link)
18:00 18:30
Press OK to store the programme.
Series Info
OK
OK
DELETE
0
--
9
Number
RETURN
RETURN
34) for "Series Timer Rec.".
y
Timer icon
TV
DRIVE
VOL
SELECT
AV
PROG/CHECK
CHAPTER
DELETE
INPUT
SELECT
SKIP
SLOW SEARCH
STOP
PAUSE
PLAY
STATUS
PAUSE LIVE TV
OK
OK
OPTION
MANUAL SKIP
-10s
Tips
≥To check programmes (
31)
≥To cancel a timer recording
programming
1 Press [3, 4, 2, 1] to select the
programme (the timer icon is
displayed) and press [OK].
2 While "Delete" is selected, press
[OK].
3 Press [2, 1] to select "Yes" and
press [OK].
– The timer icon disappears.
≥To record sound using LPCM (XP mode
only):
Set the "Audio Mode for XP Recording" to
"LPCM" in the Setup menu (
Notes
≥[RAM] [-RW‹V›] [+R] [+RW] To use a new disc,
formatting is necessary.(
26, 70)
≥The GUIDE Plus+ list is not displayed
immediately after initial tuning is done.
≥The GUIDE Plus+ system will not work if
the clock is not set correctly.
≥If "NTSC" has been selected for "TV
System" (
76), the GUIDE Plus+ system
cannot be used.
≥"FR" recording mode is not available when
the timer programme is controlled by
"Guide Link".
≥The receipt of the GUIDE Plus+ system
data is only possible via the aerial input of
this unit. The receipt of the TV Guide data
via externally connected satellite receivers
is not possible.
≥If you set a timer recording that will overlap
with other timer recordings, the
"Overlapped Timer Recording" screen
appears to help you resolve the
overlapping.
Follow the on-screen instructions.
≥Simultanious recording to HDD and DVD
is not possible.
CH
PAGE
1.3
x
EXIT
RETURN
+60s
75)
Advertisement
Table of Contents
