Table of Contents
Advertisement
Troubleshooting Guide
Playback
Issues:
Cannot switch audio.
You cannot switch the audio in the following cases.
– When a DVD-R, DVD-R DL, DVD-RW (DVD-Video
format), +R, +R DL or +RW disc is in the disc tray while
DVD drive is selected.
– When the recording mode is XP and "Audio Mode for XP
Recording" is set to "LPCM". (
When recording a digital broadcast with multiple audio
channels, this unit will record only the audio channel
selected in "DVB Multi Audio" in the on-screen display. The
audio channel cannot be switched during playback. (
You have used a digital connection. Set "Dolby Digital" to
"PCM" or connect using audio cables (analogue
connection). (
75, 81)
There are discs whose audio cannot be changed due to
how the disc was created.
Playback
Issues:
Play fails to start even when [1] (PLAY) is pressed.
Play starts but then stops immediately.
Insert the disc correctly with the label facing up. (
The disc is dirty, scratched or marked. (
You tried to play a blank disc or a disc that is unplayable on
the unit. (
15, 16, 18)
You tried to play a +RW that needs to be finalised on the
equipment used for recording.
You may be able to copy a "One time only recording" title
that was recorded to DVD-RAM using a different Panasonic
DVD Recorder to this unit's HDD, but play is not possible
due to copyright protection.
When recording to DVD-RAM using EP ( 8 hours ) mode,
play may not be possible on DVD players that are
compatible with DVD-RAM. In this case use EP ( 6 hours )
mode. (
74)
You cannot play discs during DV automatic recording.
If playing DivX VOD content, refer to the homepage where
you purchased it. (DivX) (
Make sure that the TV is turned on. If the menu or
messages are displayed, follow the on-screen instructions.
Audio and video momentarily pause.
This occurs between playlist chapters.
This occurs between chapters and with partially deleted
titles on finalised DVD-R, DVD-R DL, DVD-RW (DVD-Video
format), +R, +R DL and +RW that have been copied using
the high speed mode.
This occurs as scenes change during Quick View (Play
k1.3).
[-R]DL] [+R]DL] When playing a title recorded on both layers,
the unit automatically switches between layers and plays
the title in the same way as a normal programme. However,
video and audio may momentarily cut out when the unit is
switching layers. (
DVD-Video is not played.
Ensure the DVD-Video region number for the disc is
correct, and the disc is not defective. (
You have set a ratings level to limit DVD-Video play.
Change this setting. (
Alternative soundtrack and subtitles cannot be
selected.
The languages are not recorded on the disc.
You may not be able to use the on-screen menus to change
the soundtrack and subtitles on some discs. Use the disc's
menus to make changes. (
92
VQT2J27
Sound (Continued)
75)
Operation
82)
39)
15)
Cover)
74)
20)
No subtitles.
Subtitles are not recorded on the disc.
Turn the subtitles on and select "Text" or the subtitle
number. (
68)
Angle cannot be changed.
This function depends on software availability. Angles can
only be changed during scenes where different angles are
recorded.
You have forgotten your ratings PIN.
69)
With the tray open, press [DRIVE SELECT] to select the
DVD drive, then press and hold [¥ REC] and [1] (PLAY/
a1.3) on the main unit simultaneously for about 5 or more
seconds.
Quick View (Play k1.3) does not work.
This does not work when audio is other than Dolby Digital.
This does not work while recording in XP or FR mode.
The resume play function does not work.
82)
Memorized positions are cancelled when
– press [∫] several times.
– open the disc tray.
– [CD] [VCD] [USB] turn off the unit.
– execute a recording or timer recording.
Advertisement
Table of Contents
