Timer Recording; How View - Panasonic DMR-ES15 Operating Instructions Manual

Timer recording

Numbered
buttons
g
A
REC MODE
RAM -R -R DL -RW(V) +R +R DL +RW
See also the notes "Important notes for recording" (➔ page 14).
Preparation
• Turn on the television and select the appropriate video input to suit
the connections to this unit.
• Check the time on the unit is correct.
• Insert a disc (➔ page 16).
RQT8318
18
18
Using S
timer recordings
Entering S
can find these numbers in TV listings in newspapers and magazines.
• You can enter up to 16 programmes up to a month in advance.
1
Press [ShowView].
ShowView
2
Press the numbered buttons to enter
the S
• To correct the number
PROG/CHECK 3
Press [ENTER].
e,r,w,q
ENTER
• Confirm the programme and make corrections if necessary
• When "––––" appears in the "Name" column, you cannot set
• You can also press [REC MODE] to change the recording
• VPS/PDC (➔ page 20)
• To enter programme name
4
Press [ENTER].
The settings are stored and the programme goes to timer
recording standby.
The timer icon is displayed in left column.
"z" lights on the unit's display to indicate timer recording
standby has been activated.
Repeat steps 1–4 to programme other recordings.
■ Notes on timer recording (➔ page 19)
To exit the timer recording list
Press [PROG/CHECK].
V number to make
HOW IEW
V numbers is an easy way of timer recording. You
HOW IEW
ShowView Remain 1:57 SP
Record 8:12:34 7. 5. SUN
Input ShowView Number 0-9, and press ENTER.
ENTER --
S SUB MENU CANCEL 0 9 Number
RETURN
V number.
HOW IEW
Press [w] to move back to correct a digit.
Timer Remain 1:57 SP
Recording 8:14:56 7. 5. SUN
VPS
Name Date Start Stop Mode
PDC
1 ARD 7. 5. SUN 19:00 20:00 SP ---
Programme Name
using [e,r,w,q] (➔ page 19, Manually programming timer
recordings, step 3).
timer recording. Press [e,r] to select desired programme
position. After you have entered the information of a TV
station, it is kept in the unit's memory.
mode.
To activate the VPS/PDC function, press [e,r] to select
"ON".
ON OFF
If the broadcasting station is not transmitting VPS/PDC
signals, "---" appears.
Press [w,q] to select "Programme Name" and press
[ENTER] (➔ page 35).
Timer
Recording
No. Name
Timer icon
01 ARD 1.
VPS
No. Name Date Start Stop Mode
PDC
01 ARD 7. 5. SUN 19:00 20:00 SP ---
New Timer Programme
Drive
space
When "!" appears,
OK
make sure the
disc has a
sufficient space.