Table of Contents
Advertisement
Media Handling
Inserting Discs
1 Press [< OPEN/CLOSE] to open the tray.
– Insert a disc.
2 Press [< OPEN/CLOSE] to close tray.
Notes
≥ Ensure the disc is flat in the tray
≥ When using DVD-RAM or DVD-R, remove the disc from the
cartridge. Cartridge discs cannot be used.
It is not possible to record or play continuously from
≥
[RAM]
one side of a double sided disc to the other. You will need to
eject the disc and turn it over.
Automatic drive select function
[DVD-V] [VCD]
≥If the unit is recording to the HDD or stopped, it automatically switches
to the DVD drive when a disc is inserted.
≥If you eject a disc and close the disc tray, the HDD drive is
automatically selected.
Inserting/Removing the USB memory
Inserting the USB memory
≥Before inserting any USB memory to this unit, ensure that the data
stored therein has been backed up.
≥Check the orientation of the USB connector and insert it straight in.
≥Insert an USB device while the unit is stopped, so the "USB device"
screen is displayed. Select an item, then press [OK] to switch to the
USB-related operations (
Removing the USB memory
≥Complete all USB-related operations and pull the USB memory
straight out.
≥If a USB memory being accessed is pulled out, then the data may be
damaged.
82
VQT2J27
Insert label-up.
38, 65).
Inserting/Removing the SD Card
When the SD card slot indicator ("SD") on the unit's display is flashing,
the card is being read from or written to. Do not turn off the unit or
remove the card.
Such action may result in malfunction or loss of the card's contents.
≥Inserting foreign objects can cause a malfunction.
Inserting the card
Press on the centre of
the card until it clicks
into place.
Insert the card label up with
the cut-off corner on the
right.
Removing the card
Disc and Card Care
When using DVD-RAM or DVD-R, remove the disc from the cartridge.
Cartridge discs cannot be used.
Holding a disc or card
Handle discs by the edges to avoid inadvertently scratching or getting
oil from your fingers on the disc. Do not touch the signal surface of discs
(the shiny side) or the terminal surface (the metal part) of SD cards.
Cleaning discs or cards
Discs are not indestructible and occasionally dirt or condensation may
appear. Clean by gently wiping with a soft, dry lint-free cloth in a straight
line from the centre of the disc to the edge of the disc.
Return discs and SD cards to their cases when not in use; this helps to
protect against scratches and dirt.
Storing discs and cards
≥Do not place or store discs and cards in the following locations:
– Direct sunlight
– Very dusty or humid areas
– Near a heat source
– Places that undergo extreme shifts in temperature (condensation
can occur)
– Where static electricity or electromagnetic waves occur
≥Keep the Memory Card out of reach of children to prevent swallowing.
Discs to avoid
≥Discs that are not perfectly circular in shape
≥Warped discs, which may not balance properly in your unit, causing
improper operation or damage to the unit
≥Cracked discs
≥Discs with exposed adhesive (from removed stickers or labels, such
as may occur with rental discs or improperly cared-for discs that were
previously labeled or re-labeled)
e.g.,
If you are using a
miniSD
miniSD card, a
miniSDHC card, a
microSD card or a
microSDHC card,
insert it into the
ADAPTER
adaptor that comes
with the card.
Insert and remove this
adaptor from the unit.
Press on the centre
of the card.
Pull it straight out.
Advertisement
Table of Contents
