Table of Contents
Advertisement
DVB Auto Setup by Signal Quality
DVB Auto Setup by Region
You can restart auto channel setting for digital terrestrial channels if
the setup (
13) fails for some reason.
If you want to set the channel list best suited to your region, select
"DVB Auto Setup by Region". Follow the on-screen instructions to
select the region you live in.
However, if you perform "DVB Auto Setup by Signal Quality" or "DVB
Auto Setup by Region", all channel settings, Favourites and all the
timer recording programmes are deleted. (All the settings except for
the ratings level, ratings PIN, Owner ID, Clock and remote control
code, etc. return to the factory preset.) Recordings on the HDD will
not be deleted.
When the confirmation screen appears
Press [2] to select "Yes", then press [OK].
Tips
≥You can also use the following method to restart DVB Auto Setup
by Signal Quality.
When the unit is turned on and stopped, press and hold [CH W]
and [X CH] on the main unit simultaneously for about 5 seconds.
– Auto-Setup screen appears.
DVB Manual Tuning
You can set channels manually if the "DVB Auto Setup by Signal
Quality" or "DVB Auto Setup by Region" could not be completed
successfully.
Favourites Edit
Setup
DVB Auto Setup by Signal Quality
DVB Auto Setup by Region
DVB Manual Tuning
Frequency
Tuning
Add New DVB Channels
Signal Quality
Disc
Signal Strength
Signal Condition
Picture
DVB Preferred Multi Audio
English
Sound
DVB Preferred Subtitles
English
Display
TAB
Connection
SELECT
RETURN
Others
OK
TV: 0
CH
1 Press [3, 4] to select the channel you want to set.
– Select the channel by checking the signal strength and signal
quality displays. [Refer to "Signal Condition" (
strength and signal quality.]
2 Press [OK] to start scan.
The set channel is displayed in
the table.
≥Repeat steps 1–2 to tune
other channels.
3 Press [EXIT], then press
[W X CH] to check that applicable channels have been
selected.
Add New DVB Channels
You can search for newly added digital terrestrial channels to receive.
Favourites Edit
Setup
DVB Auto Setup by Signal Quality
DVB Auto Setup by Region
DVB Manual Tuning
Tuning
Scan
Add New DVB Channels
Disc
Signal Condition
Picture
DVB Preferred Multi Audio
English
Sound
DVB Preferred Subtitles
English
Display
TAB
Connection
SELECT
RETURN
TV: 15
Others
OK
– The unit starts searching for newly available digital terrestrial
channels. This takes about 5 minutes.
– The bar over the table shows you the search progress. At the end
of the search, the number of found new digital stations appears.
– "No new DVB channels found.", is displayed when no new
channels can be found.
Press [OK] to save the newly found channels.
Tips
To cancel in middle
Press [RETURN
].
The channels found before stopping are not saved.
DVB Manual Tuning
[CH54]
738.0
MHz
0
10
0
10
No.
Channel Name
Type
New
Radio: 0
Data: 0
START SCAN
RETURN
right) for signal
DVB Manual Tuning
Frequency
[CH54]
738,0
Signal Quality
0
Signal Strength
0
No.
Channel Name
Type
New
1
BBC ONE Wales
TV
-
2
BBC 2W
TV
-
3
BBC NEWS 24
TV
-
4
BBC Radio Wales
Radio
-
5
ITV
TV
-
TV: 15
Radio: 4
Data: 0
8 DVB channels found.
START SCAN
RETURN
CH
Add New DVB Channels
CH 21
68
CH
Channel Name
Type
Quality
27
BBC ONE Wales
TV
9
27
TV
9
BBC 2W
27
TV
9
BBC NEWS 24
27
Radio
9
BBC Radio Wales
Radio: 4
Data: 0
Searching...
RETURN
Signal Condition
You can check the quality and strength of digital broadcast signals.
When "Signal Condition" is displayed in grey and cannot be
selected:
1 Press [EXIT] to exit the screen.
2 Press [W X CH] to select a digital channel. "D" appears on the
unit's display.
3 Display the Setup menu again.
Setup
Favourites Edit
DVB Auto Setup by Signal Quality
DVB Auto Setup by Region
DVB Manual Tuning
Tuning
Add New DVB Channels
Disc
Signal Condition
Picture
DVB Preferred Multi Audio
Sound
DVB Preferred Subtitles
Display
Connection
SELECT
Others
OK
The quality and strength of the signal are shown.
Press [W X CH] to select the channel.
Signal Quality
Below 2 (display red)
2–5 (display orange)
Over 5 (display green)
Signal Strength
The display for signal strength is grey. "0" means signal strength 0%,
"10" means signal strength 100%.
≥If the signal is too strong, the display will change from grey to red.
Reduce the signal amplification at your aerial.
≥When the signal is weak:
– check that the aerial is correctly positioned.
– adjust the aerial reception with "DVB Manual Tuning" in the Setup
menu (
left).
– check that the current digital broadcast channel is correctly
broadcasting.
– check that your aerial is capable of receiving DVB broadcasts.
DVB Preferred Multi Audio
Choose the audio language for digital broadcast.
MHz
If the selected language is not available, then the original language
10
will be selected.
10
[English]
[Welsh]
DVB Preferred Subtitles
Choose the subtitle language for digital broadcast.
If the selected language is not available, then the original language
will be selected.
[English]
[Welsh]
[English for hearing impaired]
[Welsh for hearing impaired]
[Gaelic for hearing impaired]
English
DVB Signal Condition
English
DVB Channel
TAB
Signal Quality
0
RETURN
Signal Strength
0
RETURN
The signal quality is so poor that there
may be interference in the pictures and
sound.
The signal quality is basically adequate,
but brief interference in the pictures and
sound is possible in isolated case.
Optimum picture and sound quality.
[Gaelic]
[Gaelic]
10
10
Channel +
Channel –
73
VQT2J27
Advertisement
Table of Contents
