Table of Contents
Advertisement
Software (Firmware) Update
You cannot operate the unit until the update is
complete. Removing the AC mains lead while the
update is in progress may damage the unit. Don't
remove the AC mains lead during the update.
Update software (firmware) of
this unit
Software of this unit can be updated automatically by the
following methods at the specified time.
(Default setting is 3 a.m.
≥From broadcasts
≥From Internet [Network connection and setting are
required. (
16, 21)]
≥The time it takes to update depends on the connection.
–From broadcast: More than 2 to 4 hours
–From Internet: About 1 hour
∫ The unit's display during the update
≥When "FINISH" is displayed, update of the software
(firmware) has completed.
≥ The download time depends on the network or broadcast environment.
≥ If the timer recording is scheduled within the following time at the start of
the download, the download will not be executed.
– From broadcast: Within 4 hours
– From Internet: Within 1 hour
≥ You can also download the latest software (firmware) from the following
website and burn it to a CD-R to update the software (firmware).
http://panasonic.jp/support/global/cs/
≥ If you do not want to perform the software (firmware) update, set the
"Software Update in Standby" to "Off". (
86
VQT2J59
85, Software Update in Standby)
85)
CI Plus compatible CAM
software (firmware) update
Software (firmware) of CAM (compatible CI Plus) can be
updated automatically from broadcasts.
Availability of software (firmware) update is detected while
viewing the programmes compatible with CI Plus.
1
When notification is displayed on the
screen, select "Yes" and press [OK].
≥If for some reason the notification is not displayed,
or if cancelled, the notification is instead displayed
on the Channel information (
e.g.,
Encrypted
To execute CAM software upgrade, press the "Red"
button.
2
Follow the instructions on the screen.
∫ The unit's display during the update
≥ CAM software (firmware) update notice is not displayed in the following
cases:
– When recording a programme
– When timer recording and CAM update occur simultaneously
– When displaying FUNCTION MENU, DIRECT NAVIGATOR, etc.
≥ Operations such as view, playback, or record cannot be performed while
upgrading the CAM.
Any buttons on the remote control or the unit cannot be used while
upgrading the CAM.
≥ If the timer recording is started, CAM software upgrade is cancelled to
start recording.
≥ For details, refer to your CAM's operating instructions or consult your
dealer.
24).
All DVB Channels
Change category
CAM Upgrade Info
Now
Dolby D
Advertisement
Table of Contents
Troubleshooting
