Hdd / Disc - Panasonic Diga DMR-XS385 Operating Instructions Manual

Changing the unit's settings
∫ Signal Condition
You can check the quality and strength of signals.
≥Press [2, 1] to select the LNB.
≥Press [W X CH] to select the channel.
Signal Quality 0
0
Signal Strength
Satellite
Parameter MHz,V,
Change Input
RETURN
Signal Quality
Red bar: The signal quality is bad.
Orange bar: The signal quality is poor.
Green bar: The signal quality is good.
Signal Strength
"0": Signal strength is 0%,
"10": Signal strength is 100%.
≥When the signal is too strong (red bar), reduce the signal
amplification at your aerial.
≥When the signal is weak:
–adjust the position and direction of the dish.
–check that the current digital broadcast channel is
correctly broadcasting.
∫ Antenna System
You can receive several satellites if you have DiSEqC
control antenna system.
1 Select "Antenna System".
2 Press [2, 1] to select antenna system.
One LNB Compatible with Single LNB
MiniDiSEqC Up to 2 LNBs can be controlled.
DiSEqC1.0 Up to 4 LNBs can be controlled.
≥This unit supports DiSEqC Version 1.0.
∫ LNB Configuration
You can set LNB setting when necessary.
≥If you do not know the connected satellite, select "No
Satellite" in "Satellite". (Available satellite will be searched
in Auto Setup.)
≥If you select "User defined" in "Satellite", set "Test
Transponder Frequency" manually.
∫ Preferred Language
Select the language for multi broadcast.
If the selected language is not available, then the original
language will be selected.
78
VQT2J59
10
10
kS/s
Channel Up
Channel Down

HDD / Disc

∫ Settings for Playback
Soundtrack
Select the audio language.
≥If "Original" is selected, the original language of each
disc will be selected.
≥Enter a code with the number buttons when you
select "Other ¢¢¢¢". (
Subtitles
Select the language for subtitle.
≥If "Automatic" is selected and the language selected
for "Soundtrack" is not available, subtitles of that
language will automatically appear if available on that
disc.
≥Enter a code with the number buttons when you
select "Other ¢¢¢¢". (
Menu
Select the language for disc menus.
≥Enter a code with the number buttons when you
select "Other ¢¢¢¢". (
DVD-Video Parental Control
Set a ratings level to limit DVD-Video play.
≥Follow the on-screen instructions.
≥PIN is required to change. (
DivX Subtitle Text
Select the language for DivX subtitles text (
≥This item is displayed only after playing back a DivX
file with subtitle text.
85, Language code list)
85, Language code list)
85, Language code list)
76)
41).