Connection; Basic Connections - Panasonic Diga DMR-XS385 Operating Instructions Manual

Connection

Basic connections

When connected to an HDMI compatible unit, you can enjoy high quality, digital video and audio.
≥Before connection, turn off all equipment and read the appropriate operating instructions.
≥Other TV connections (
∫ Satellite cable
≥Connect LNB IN 1 terminal to the satellite dish when you use only one terminal.
≥Connect both LNB IN 1 and LNB IN 2 to the satellite dish to record 2 programmes simultaneously or view TV during
recording.
To household mains socket
(AC 220 to 240 V, 50 Hz)
AC mains lead
(supplied)
Connect only after all other
connections are complete.
5
Cooling fan
AC IN
This unit's rear panel
Satellite cable (
Required setting:
Set "HDMI Video Mode" and "HDMI Audio Output" to "On" (
≥ Supply power from another device when you use 2 or more devices to receive satellite broadcast, because this unit does not supply power when it is
turned in standby.
≥ The HDMI connection supports VIERA Link "HDAVI Control" (
However, to perform PAUSE LIVE TV (
connect a 21-pin Scart cable.
≥ You can view only with the 21-pin Scart cable connection, without connecting an HDMI cable. Set according to the connected TV. (
≥ The 21-pin Scart cable connection with the Q Link compatible TV supports "Q Link" (
14
VQT2J59
16)
1
2
COMMON INTERFACE
LNB IN 1 LNB IN 1
10BASE-T/
100BASE-TX
HDMI cable ( 15)
above)
26) and Direct TV Recording (
HDMI IN
TV
3
LNB IN 2 LNB IN 2
OPTICAL
13V/ 18V 400mA max
DIGITAL AUDIO OUT
(PCM/BITSTREAM)
1 2
82). (The default setting is "On".)
66).
29) for programmes that cannot be received by this unit, you need to
66).
AV
21-pin Scart cable
4
VIDEO
AV1
(TV)
L 
VIDEO
RGB/S VIDEO
AV2
R
(EXT)
AUDIO

VIDEO
OUT

RGB/S VIDEO
Satellite dish

83, AV1 Output)