Colour System / Panasonic Auto; Cinema Reality / P-Nr - Panasonic TH-65PHD7E Operating Instructions Manual

Colour system / Panasonic Auto

Select Signal from the "Setup" menu during AV(S Video) input signal. ("Signal
[AV]" menu is displayed.)
If the picture image becomes unstable:
With the system set on Auto, under conditions of low level or noisy input
signals the image may in rare cases become unstable. Should this occur,
set the system to match the format of the input signal.
Mode
Colour system
Panasonic Auto
(4:3)

Cinema reality / P-NR

Cinema reality:
When on, the display attempts to reproduce a more natural interpretation of sources
such as movie pictures, which are recorded at 24 frames per second.
If the picture is not stable, turn the setting to off.
Note:
When On, this setting only affects the following signal input:
• NTSC / PAL signal input during "AV(S Video)" input signal.
• 525i(480i) 625i(575i), 1125(1080) / 60i signal input during "Component" input
signal.
P-NR:
Automatically reduces unwanted picture noise.
Note:
P-NR cannot be adjusted while a PC signal is being applied.
1
2
R
Press to select the "Colour system" or
"Panasonic Auto".
Press to select each functions.
Set the colour system to match the input signal. If set to "Auto", the colour system is determined
automatically.
Auto
Set to "4 : 3" to view 4:3 images in an unchanged format when Panasonic Auto is
selected. If you would like to view 4:3 images in Just format, set to "Just".
Press to select Cinema
reality or P-NR.
Press to set On / Off.
Press to exit from adjust mode.
Setup for Input Signals
Function
PAL SECAM M.NTSC
Signal
3D Y/C Filter (NTSC)
Colour system
Cinema reality
Panasonic Auto (4 : 3)
P-NR
Signal
Cinema reality
P-NR
Setup
Signal
Component / RGB-in select
Input label
Power save
Standby save
Power management
Auto power off
OSD Language
Press ACTION ( ) button
Signal
3D Y/C Filter (NTSC)
Colour system
Cinema reality
Panasonic Auto (4 : 3)
P-NR
NTSC
Setup
Signal
Component / RGB-in select
Input label
Power save
Standby save
Power management
Auto power off
OSD Language
Press ACTION ( ) button
[ AV ]
Signal
Sync
On
Auto Cinema reality
Off
P-NR
4 : 3
H-Freq. 33.8
Off
V-Freq. 60.0
[ Component ]
Signal
Cinema reality
Off
P-NR
Off
H-Freq. 33.8
V-Freq. 60.0
1/2
RGB
PC
Off
Off
Off
Off
English ( UK )
[ AV ]
On
Auto
Off
4 : 3
Off
1/2
RGB
PC
Off
Off
Off
Off
English ( UK )
[ RGB ]
Auto
Off
Off
kHz
Hz
[ DVI ]
Off
Off
kHz
Hz
33